Download & Print This Information
 

material safety & Data Sheet
PERSNICKETY® BRAND
713 BIOLOGICAL INOCULANT

PRODUCT INFORMATION
Trade Name: PERSNICKETY® Brand 713 Biological Inoculant
Name and/or Family Description: Strict and Facultative Anaerobic Microbes
DOT Hazard Classification: Non-Hazardous
NFPA: Health Hazard-O-Normal Material; Flammability-O-Above 200
Deg.F; Reactivity-O-Stable
CAS Number: Proprietary
RCRA Hazard Class (If discarded): None
EPA Priority Pollutants: None

 

HAZARDOUS INGREDIENTS

As established by the American Conference of Governmental Industrial Hygienists and/or standards promulgated by OSHA, data indicates that to the best of our knowledge ingredients are non-hazardous.

 

PHYSICAL DATA
Boiling Point (Degrees C.): 98° C.
Solubility in Water @ 25 Degrees C.: Soluble
Specific Gravity @ 25 Degrees C.: 1.004 Gram/ML
Vapor Pressure, mm Hg @ 25 Degrees C.: >1
Vapor Density, (Air = 1): <1
Appearance @ 25 Degrees C.: Clear to light gray liquid
Odor: Slight H2S
Flash Point, PMCC, Degrees F.: >200
Evaporation Rate (Butyl Acetate = 1): 0.1

 

FIRE AND EXPLOSION HAZARD DATA

Flash Point: (See PHYSICAL DATA section)
Flammable Limits in Air: % By Volume: Non-flammable
Lower: Non-flammable
Upper: Undetermined
Extinguishing Media: N.A.
Special Fire Fighting Procedures: Self-contained breathing apparatus and protective clothing should be worn in fighting fires involving chemicals.
Unusual Fire & Explosion Hazards: None known to Syneco Systems, Inc.

 

HEALTH HAZARD DATA

Threshold Limit Value: Not determined by ACGIH or OSHA.
Effects of Over Exposure: Skin: May cause some drying of skin.
Eyes: May cause some stinging of the eyes.
Emergency & First Aid Procedures: Flush eyes with copious amounts of water for minimum of 10-15 minutes. Wash contaminated skin areas with soap and water. If any irritation develops consult a physician. Remove any contaminated clothing.

 

REACTIVITY DATA
Stability: Stable (X) Unstable ( )
Incompatibilities (materials to avoid): Strong oxidizing agents can cause reaction.
Hazardous Decomposition Products: None
Hazardous Polymerization: May occur ( ) Will not occur (X)
Conditions to Avoid: Not applicable

 

SPILL, LEAK AND DISPOSAL PROCEDURES
Action to Take For Spills: (Use appropriate safety equipment.) Use absorbent material to collect/contain spillage ready for disposal. Contain large spills with earth/sand and pump into suitable tank. Wash area with suitable detergent and rinse thoroughly.
Disposal Method: All local, state and federal regulations concerning health and pollution should be reviewed to determine procedures.

 

SPECIAL HANDLING INFORMATION
Ventilation: 1. Local Exhaust: None should be needed.
2. Mechanical (general): Recommended
3. Respiratory Protection (type): None necessary
Protective Clothing: Clean body covering clothing. Rubber gloves.
Eye Protection: Chemical workers goggles recommended
Other Protective equipment: Eye wash and safety shower in work area.

 

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE

Store in well ventilated areas below 120 degrees F. but protect from freezing.

This data is furnished gratuitously independent of any sales of the product and only for your investigation and independent verification. While the information is believed to be correct, Syneco Systems, Inc. shall in no event be responsible for any damages whatsoever, directly or indirectly, resulting from the publication or use of or reliance upon data contained herein. No warranty, either expressed or implied, of merchantability, of fitness, or of any nature with respect to the product, or to the data is made herein.


© 1994-2007 Syneco Systems, Inc. All Rights Reserved.

© 1994-2006 Syneco Systems, Inc.
Privacy Statement
Site Design: TECMINN