Download & Print This Information

 

material safety & Data Sheet

PPERSNICKETY® BRAND OXIDIZING CATALYTIC MEDIA

I. PRODUCT INFORMATION
Trade Name: Persnickety® Brand Catalytic Media
Name and/or Family Description: Oxidizing Media for Odor Control
 
II. HAZARDOUS INGREDIENTS
Chemical Names: NA
CAS Numbers: NA
%: NA
Exposure Limits in Air (units): NA
May contain Free Silica  
 
III. CHEMICAL AND PHYSICAL PROPERTIES
Vapor Density (Air=1): NA
Specific Gravity: 1.12
Solubility in Water: 0
Vapor Pressure, mmHg @ 20°C: 0
pH: NA
Appearance & Odor: Black, Granular, Odorless Solid
Melting Point or Range °F: NA
Boiling Point or Range °F: NA
Evaporation Rate (BuAcetate=1): NA
VOC (EPA Method 24): 0
 
IV. SHIPPING REGULATIONS
DOT Proper Shipping Name: NA NA
DOT Hazard Class: NA NA
DOT ID Number: NA NA
DOT Hazardous Substance: NA NA
 
V. FLAMMABILITY & EXPLOSIVE PROPERTIES
Flash Point °F: NA
Auto Ignition Temperature °F: NA
Flammability Limits in Air, Volume %: LEL (Lower) NA UEL (Upper)
Fire Extinguishing Materials: None
Special Fire Fighting Procedures: None
Unusual Fire & Explosion Hazards: None
Hazardous Products Formed by Fire: None
 
VI. HEALTH HAZARD INFORMATION
Symptoms of Overexposure (For each potential route of exposure)
Inhalation:  Overexposure to dust may irritate the nasal passage
Eyes: May cause eye irritation similar to dust
Skin: Contact with skin has no effect
Absorbed Through Skin: None
Swallowed: None
Health Effects or Risks From Exposure
Acute: No acute effects to health known
Not Toxic
Chronic: Prolonged exposure to respirable silica may cause health risks
First Aid Emergency Procedures
Eye Contact:  Flush with water
Skin Contact:  None
Inhalation:  None
Suspected Cancer Agent  
No - The product ingredients are not found in the following lists: OSHA - NTP - IRAC
Medical Conditions Aggravated By Exposure: None known
 
VII. REACTIVITY DATA
Stability: Stable
Conditions to Avoid: NA
Incompatibility (materials to avoid): NA
Hazardous decomposition products
(including combustion products):
None
Hazardous Polymerization: Will not occur
 
VIII. SPILL, LEAK & DISPOSAL PROCEDURES
Spill Response Procedures: (include employee protection measures) No special procedures required
Preparing Waste for Disposal: (container types, neutralization, etc.) No special procedures required
Recommended Methods of Disposal: Dispose of all wastes in accordance with Federal, State & Local regulations
 
IX. SPECIAL HANDLING INFORMATION
Ventilation & Engineering Controls:  No Special Requirements
Respiratory Protection (type):  NIOSH/MSHA approved dust mask (TC-21C-132)
Eye Protection:  None required
Gloves (specify material):  None required
Other Clothing & Equipment:  No special requirements
Work Practices, Hygienic Practices:  No special requirements
Other Handling & Storage:  No special requirements
Protective measures during maintenance of contaminated equipment: NA
   
X. PREPARATION INFORMATION
Revision Date:  March 2005


© 1994-2007 Syneco Systems, Inc. All Rights Reserved.

© 1994-2006 Syneco Systems, Inc.
Privacy Statement
Site Design: TECMINN